Laboratory Design

Best Practices for Designing a Laboratory Where Hydrogen Will Be Used

What does a laboratory designer need to think about?

A laboratory designer should be aware of relevant codes and standards, especially NFPA 45 “Standard on Fire Protection for Laboratories Using Chemicals”. Many of the subjects listed below are based on best practices that have been extracted from NFPA 45.

Primary Design Considerations:

  • Minimize storage, transport, transfer, and end use quantities of hydrogen. The AHJ may exercise discretion as to what quantity of gaseous or liquid hydrogen is permitted within the laboratory. Quantities greater than 11.3 m3 (400 ft3) of gaseous hydrogen or 150 L (39.6 gal) of liquid hydrogen must meet the location requirements for storage imposed by OSHA.
  • Consideration should be given to the potential exposure effects on or from systems that will be in proximity to the planned system.
  • Where possible, consider use of automatic and failsafe system controls.
  • Access control of personnel may be required.

Note: For facilities other than laboratories, see Facility Design Considerations.